2. Remove coil mounting screw securing coil assembly to right side casing flange. 3. Remove coil assembly. 4. Lay fan coil unit on its right side and reinstall coil assembly with condensate pan down. (See Fig. 4.) 5. Attach coil to casing flange using coil mounting screw pre-viously removed. 6. Make sure the pan cap in the fitting door is
A plastic film (PE) of a minimum thickness of 150 µm should be used as the second ply. Alternatively, two plies of thinner films (e.g. 100 µm) may also be used. The paper and film should always be of a width such that they reach at least 30 cm into the coil eye on both sides.
We are specialist in used servo feed, press feeding, coil reel, pneu feed, coil cradles and other coil handling equipment. Used coil handling and press feed equipment can often be acquired at a fraction of the new cost. Contact us now for all of your used feed equipment needs.
Bye Bye Mattress to consumers. MRC uses third parties to collect, transport and recycle 1.5 million mattresses and box springs annually in California. Out of the 1.5 million units, about 300,000 contain a pocketed coil layer which contains individual springs, wrapped in a polypropylene sleeve. Although pocketed coils contain over 90% metal, the
The Perfect conveying system connects the hot rolling mill with the hot-rolled coil storage area. The coiler car of the rolling mill takes the coil from the reel and places it on a deposit. Here it is secured with two straps for further transport and then transferred onto the Perfect conveyor. On its way to the warehouse, the coil passes through.
DROP DECK,Benson 48' aluminum flatbed. All aluminum construction including frame, front, rear, sides and floor with (3) Apitong nail strips, 30” king pin, reinforced coil zone rated for 52,000 in 4’ c. $63,990. Texarkana, TX, USA. Click to Contact Seller.
The horizontal coil lifting tongs is designed for handling horizontal steel coils of different specifications in the hot rolling mill and cold rolling mills with capacity from 8 tons to 50 tons. With rotary design, the jaws of lifting tongs can be turned over 90°mechanically and electrically, with an electrical detection device or a
Genkinger Material Handling. Integrated vehicles for the individual requirements of your production & warehouse logistics. Close to the customer, worldwide & always “one step ahead”. Contact us with your requirements. We would be happy to advise you competently. Phone: +49 (0) 7381 186-0. E-Mail:
This 50-metric ton capacity coil transfer car can transport two 25-metric ton coils. Replaceable wear pads protect the coil surface. The operator walks along with car, operating it from a hand-held pendant. Battery Powered. This 20,000-pound capacity transfer car is used to move stamping dies.
RH4000/RH6000 Self Powered Roll Transporter for transporting rolls up to 60" in diameter,, weighing as much as 4000 lb./6000lb respectively. Rolls are secured by a removable safety bar to contain the rolls while in transport. Roll Handling Equipment is frequently to handle rolls of material including paper, film, foil, textile and nonwovens
Coil override devices are designed to effectively and safely rolled coils from vertical to horizontal and vice versa. The device simplifies the dangerous rolling process rolling process. It can also be used for safe rolling of paper rolls, plastic films, Perfectized products and all heavy parts that need to change the vertical / horizontal position.
Product highlights. AMOVA develops highly efficient, turnkey storage solutions including transport and control equipment and warehouse management systems. We are experts in the field of storage technology. This also includes crane- or vehicle-operated flat stores. AMOVA has the perfect solution for your requirements.
