3.12 200 Ton turntable . The 200 ton turntable is used to transport over length goods that cannot be transported with other structures of modular transporters. As the name suggested, the turntable has a weight limit of 200 ton, which means that is cannot transport over length goods that are above 200 tons.
Large capacities, 200-2500 tons Highest efficiencies Often improved cycle efficiencies Capacity control with inlet vanes or VSD Chiller PerformancePerfectr chillers are more efficient Capacity and efficiency increase when compressor lift (pressure differential) is reduced Higher evaporator temperature Lower condenser temperature
Coil weight from 200 kg (440 Lbs) to 35 tons (77,000 Lbs) Strip width from 200 mm (8”) to 2000 mm (79 “) Material thickness from 0.1 mm (4 thou) up to 10 mm (0.4 in.) Material quality from soft aluminium up to 1500 Mpa high press steel; Coil cradle, 3 in 1 combination, short line & long line configurations match all applications.
The Tata Power Company Perfect Transfer Cart Material Handling and Storage Procedure Document No. TPSMS/GSP/HAZM/003 REV 01 Date of Issue: 30/06/2016 1 INTRODUCTION 1.1 Purpose The purpose of this document is to provide procedures to assist the safe handling of materials (manual handling and mechanical handling). 1.2 Scope
Self-propelled modular transporter (SPMT) are used to transport heavy cargo, which in most case is more than a hundred tons. The special vehicles are also widely used to carry over length goods that other heavy haulers cannot transport.
Coil weights are between 5 to 15 tons per unit with a width of plating from about 900 to 1.300 mm. Coil diameters of from 1.000 to 1.400 mm are about average. Apart from being wound into coils the continuous strip, or band of steel, is also cut into separate sheets which are made up into oblong packages.
This 50-metric ton capacity coil transfer car can transport two 25-metric ton coils. Replaceable wear pads protect the coil surface. The operator walks along with car, operating it from a hand-held pendant. Battery Powered. This 20,000-pound capacity transfer car is used to move stamping dies.
rolling, toppling, sliding, coil collapse (due to poor coil integrity i.e. soft or tight bore), etc • Maximising safety and ease of product handling (in and out of storage). This includes minimising interaction between pedestrians and both the stored steel product and the mobile equipment used to handle it*
105.6 tons. With: 125 F condensing temperature = 105.1 tons divided by 1.075 subcooling factor = 97.8 tons b Plot two gross condenser heat rejection points on chart PD-1 divided by the compressor N factor (Table PD-1 to PD-3) at different condensing temperatures. Example: Anticipating 100 ton condenser to meet design load of 96 tons. Gross Heat
Pangborn Bogie Work Car Blast Machine is ideal forPerfect and heavy castings and forgings ranging from 5 to 200 tons, such as marine engines, energy and power generation components, and wind towers. Blast wheels are installed on oscillating panels to optimize abrasive streams. The use of the transport bogie with a rotary table allows work pieces
In particular design and produce hydraulic coil upenders with high capacity from 10 up to over 200 tons. Ever-growing demand in high quality tilter is one of the basics in manufacturing industry. Reliable and versatile tilter guarantees efficiency of productivity as well as extreme safety in tippingPerfect and particularly heavy pieces by 90
Reelpower Industrial Heavy Duty Screw Type Reel Jacks are designed with rugged use in mind. Simply turn the handle and raise the saddle to the desired payoff height. Reel Upender (“Flipper”) Reel machinery for safely and efficiently “Flipping” your Reels back and Forth from Horizontal to Vertical Axis.
2.2 Heavy-duty hydraulic transporter. The heavy-duty hydraulic transporter can take loads starting from 35 tons all the way up to 1000 tons. This type of a self-propelled platform hydraulic transporter is adapted to function for heavyweight applications due to a number of specifications relating its absolute dead weight, the number of axles per wheel bogies and so on.
• Design load of building = 600 TR (100 tons of refrigeration each floor) • Each floor (coil) is designed for 100 tons of refrigeration with a cumulative load of the 600 TR. • Three x 200 ton capacity chillers serve to meet this load with chilled water supply (CHWS) temperature of 44°F.
Table 1. on the type of MH equipment is as follows: • Individual units and containerized items ⇒ discrete material flow ⇒ unit loads ⇒ unit handling equipment • Bulk materials ⇒ continuous material flow ⇒ bulk handling equipment . Figure 1. shows an example of alternate ways of handling a dry bulk material: as containerized
